| After-sales Service: | Online/Email/Wechat/Whatsapp |
|---|---|
| Warranty: | One Year |
| Driving Type: | Electric Limit Switch |
|
Still deciding? Get samples of US$ 72/Set
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This CK1000 automation for garage door can be installed on the side or on the top in the middle. We will provide you with the necessary installation accessories according to your needs. We have sold many garage door operators of the CK series to the world, and they are widely praised by customers. We believe that our products can bring convenience to you.
|
Unit model |
CK1000 |
|
Power supply |
AC110V/220V |
|
Motor power |
DC24V,100W |
|
Working temperature |
-20-50ºC |
|
Relative humidity |
≤90% |
|
Output Torque |
1000N |
|
Door area |
16 Sq.m. |
|
Door moving speed |
12cm/sec. |
|
Limit switch |
Electronic limit switch |
|
Noise |
≤56dB |
|
Remote control range |
Over 30m |
|
Recording of up remotes |
20 |
|
Remote frequency |
433.92Mhz |
|
Working Duty |
S2 15min |
|
Working temperature |
-20-70ºC |
Here we showed you the programming of this automation for garage door , and it is detailed in the user manual of garage door opener, please read the user manual carefully before installation and install it by the professionsal electrician.
Setting Open and Close Positions
Press and hold SET until the P1 displaying, press SET, it will display OP. Then press UP, after the door reached the open position, please press the SET.
CL is displaying, then press DOWN, it displays CL. When the door has reached the closed position, press SET.
The door will open and close automatically to map the open and close sensitivity .
when it shows "- - ", completed.
Cancel the transmitter:
(Please note when the unit has stored 20 codes,The LED flashes Fu, or preventing coding mistakes,it is necessary to cancel all the stored codes.)
When it displays Fu, press and hold CODE more than 8 seconds until it flashes dL , all the codes will be cancelled.
Adding or Changing Transmitters
Press CODE, it displays Su , press a button on the transmitter, then release and press the same button again, Su flashes, then it displays - - to show setting is complete.
(Repeat up steps to code a maximum of 20 different transmitters' and/or buttons.)
Force Adjustments
(The door meets the hinders will rebound and it stops automatically when
overload.)
Press and hold SET, it displays P1, press UP once, it displays P2, press SET once again, it will show the current situation. Press UP to increase the force one degree and press DOWN to decrease one degree. Maximum degree is F9 and minimum is "F1". Press SET to confirm. The default setting is F5.
Our main business is divided into three sectors.
){kind=link}