WIFI Controller User Instruction
Important information: to ensure a good performance of this WIFI
controller, it is recommended to apply this product on sliding gate length
over 2m, single travel(open or close) over 10 sec.
1. Parameters
1). Power Supply: AC110V/220V
2). Output single channel signal
3). Can accept closed in place signal
2. Wiring Instruction
The blue terminal should connect to AC 110V/220V mains power.
White Wire: Output signal, should connect to "O/S/C" and "COM" terminals on the motor control board.
Green Wire: Open or Closed in place feedback signal. Should connect to open/closed in place terminal if the motor control board has a standalone terminal for it. If the control board doesn't have a standalone terminal, then should connect to the door magnetic alarm.
3. Connect to Equipment
Make sure your mobile phone has connected to the internet through 2.4G WIFI.
This WIFI device only supports 2.4G WIFI. If you router supports both 5G and 2.4G WIFI, please select 2.4G WIFI.
Download the Tuya or Smart Life App from App Store or Google Play Store.During paring, make sure your mobile phone and WIFI device is connected to the same WIFI router.
Make sure the Mac address of your router is open, if not, please close the Mac flittering.
){kind=link}
){kind=link}